| |
|
| Artikel-Nr.: 3794E-1784328 Herst.-Nr.: NCP1075BBP130G EAN/GTIN: k.A. |
| |
|
| | |
| Eingangsspannung max. = 10 V Montage-Typ = THT Pinanzahl = 7 Ausgangsstrom max. = 400mA Gehäusegröße = PDIP Eingangsspannung Bereich = –0,3 → 10 V Eingangsspannung min. = –0,3 V Betriebstemperatur max. = +150 °C Länge = 9.37mm Breite = 6.6mm Höhe = 3.43mm Ausgangsstrom-Bereich = 400 mA
The NCP1075A & NCP1075B products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a two different pin out of the very common PDIP 7 package, it offers a high level of integration, including soft start, frequency jittering, short circuit protection, skip cycle, a maximum peak current set point, ramp compensation, and a dynamic self supply (DSS, eliminating the need for an auxiliary winding).Up to 20W output SMPS design capability Ability to scale for efficiency or size Adjust output current protection based on output power demand Eliminate acoustic noise Eliminate Aux winding Provides more robust protection without worrying about the coupling of the aux winding Improved efficiency at light load / Improved EMI over the entire load <50mW no Load Power Consumption Better EMI Signature Over the Entire Operating Range Enhanced Protection Against too Low or too High Input Voltage Weitere Informationen: | | Eingangsspannung max.: | 10 V | Montage-Typ: | THT | Pinanzahl: | 7 | Ausgangsstrom max.: | 400mA | Gehäusegröße: | PDIP | Eingangsspannung Bereich: | –0,3 → 10 V | Eingangsspannung min.: | –0,3 V | Betriebstemperatur max.: | +150 °C | Länge: | 9.37mm | Breite: | 6.6mm | Höhe: | 3.43mm | Ausgangsstrom-Bereich: | 400 mA |
|
| | |
| | | |
| Weitere Suchbegriffe: 1784328, Halbleiter, Stromversorgung, AC/DC Wandler, onsemi, NCP1075BBP130G, Semiconductors, Power Management ICs, AC-DC Converters |
| | |
| |